Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
VLAN Configuration
Syntax configure vlan type=port OR
Syntax vlan type=port
Adding VLANs
Syntax add id=<vlan Id> [name=<vlan name>] port=<number|list|range>
[forbid=<number|list|range>] [<mgt|nomgt>]
Disabling Management on VLAN
Use the <nomgt> option when creating a VLAN as shown in the add command above.
Starting VLANs
Syntax start vlan=<name|number|list|range>
Saving the configuration
Syntax save
Editing VLANs
Syntax edit id=<vlan Id> [name=<vlan name>] port=<number|list|range>
[<mgt|nomgt>]
Displaying the VLAN information
Syntax show vlan type=<port|tag> [<id=vlanid>]
Magnum6K25#vlan type=port
Magnum6K25(port-vlan)## add id=2 name=test port=1-10
Magnum6K25(port-vlan)## start vlan=all
Magnum6K25(port-vlan)## save
Saving current configuration...
Configuration saved
FIGURE 70 – configuring VLANs on Magnum 6K switch
The example below shows how to add three different VLANs. Along with the VLANs, Port 14 is
assigned to the four VLANs – the three new ones added plus the DEFAULT-VLAN 1. The following
108