Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Syntax tacserver <add|delete> id=<num> [ip=<ip-addr>] [port=<tcp-port>]
[encrypt=<enable|disable>] [key=<string>] [mgrlevel=<level>]
[oprlevel=<level>] – adds a list of up to five TACACS+ servers where
<add|delete> – [mandatory] adds or delete a TACACS+ server.
id=<num> – [mandatory] the order in which the TACACS+ servers should be polled for
authenticaton
[ip=<ip-addr>] – [mandatory for add] the IP address of the TACACS+ server
[port=<tcp-port>] – [optional for add] TCP port number on which the server is listening
[encrypt=<enable|disable>] – [optional for add] enable or disable packet encryption
[key=<string>] – [optional for add, mandatory with encrypt] when encryption is enabled,
the secret shared key string must be supplied
[mgrlevel=<level>] and [oprlevel=<level>] – [optional] specifies the manager and
operator level as defined on the TACACS+ server for the respective level of login
Chapter 8 – Port mirroring and
setup
Syntax show port-mirror – display port mirror settings
Syntax port-mirror <enter> - configure port mirror settings
Syntax setport monitor=<monitor port number> sniffer=<sniffer port number> - set port
mirror settings
Syntax prtmr <enable|disable> - enable or disable port mirror settings
Syntax device – configure device and port specific settings
Syntax
setport port=<port#|list|range> [name=<name>] [speed=<10|100>]
[duplex=<half|full>] [auto=<enable|disable>] [flow=<enable|disable>]
[bp=<enable|disable>] [status=<enable|disable>] – configure port settings
Syntax show port[=<Port number>] – display port settings
Syntax flowcontrol xonlimit=<value> xofflimit=<value> - configure flow control buffers
Syntax show flowcontrol – display flow control buffers
Syntax backpressure rxthreshold=<value> - configure backpressure buffers
Syntax show backpressure – display backpressure buffers
265