Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
----------------------------------------------------
PORT | MODE | STATUS
----------------------------------------------------
14 | TAGGED | DOWN
15 | TAGGED | DOWN
16 | TAGGED | DOWN
VLAN ID: 30
Name : marketing
Status : Active
----------------------------------------------------
PORT | MODE | STATUS
----------------------------------------------------
14 | TAGGED | DOWN
15 | TAGGED | DOWN
16 | TAGGED | DOWN
FIGURE 72 – Example for Tag VLAN
Tag VLANs and Management
Normally, for security reasons, a user may want to disable management information propagating
on a specific VLAN. By default, management information propagates on VLAN 1 (default
VLAN). To disable management or to enable management information from propagating on a
VLAN, please use the commands listed below:
Syntax add id=<vlan Id> [name=<vlan name>] port=<number|list|range>
[forbid=<number|list|range>] [<mgt|nomgt>] – add VLANs
GarrettCom recommends to disable management function when the VLANs are added
using the add command shown above. By default, management is allowed (enabled) on a
VLAN.
Syntax edit id=<vlan Id> [name=<vlan name>] port=<number|list|range>
[<mgt|nomgt>] – change VLAN assignment
THE EDIT COMMAND ONLY ASSOCIATES THE PORT WITH
THE VLANS. So for example, if VLAN 5 had port 10-14, an edit
command on port 14 only will drop ports 10-13 from VLAN 5. See
example below.
Magnum 6K25# vlan type=tag
Before exiting
–
don’t forget to save the configuration or
d
iscar
d
the con
f
i
g
uration b
y
d
oin
g
a reboot.
118