Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Command Description
del event=<event-id|list|range|all> disables alarm action in response to the specified
event ID
del port=<number|list|range>
delete specified ports from the LACP
membership. Requires the lacp module.
delete id=<1-5>
delete the specific id specified. The deleted id no
longer receives the traps via email. The id is
added using the “add” command
delete user=<name> deleting a user
deny ip=<ipaddress>
mask=<netmask> service=<name|list>
deny specific IP address or range of IP addresses
device configure device and port specific settings
dualhome enter the dual-homing configuration sub-system
dualhome <enable|disable> enable or disable dual-homing
dualhome add port1=<port#>
port2=<port#>
OR
dualhome add primary=<port#>
secondary=<port#>
dual-homing setup similar to that of unmanaged
switches such as ESD42
dual-homing setup as primary-secondary mode
dualhome del Delete the dual-homing setup
edit id=<vlan id> [name=<vlan name>]
port=<number|list|range>
[<mgt|nomgt>]
edit existing VLAN name
edit port=<number|list|range>
[priority=<priority>]
edit the membership of the ports specified for
LACP ports. The priority can be from 0 –
6553. Requires LACP module.
281