Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
email – [mandatory] email address of the recipient
traps – [optional] this is the trap filter. If value is “all”, all traps of any type will be sent to
this recipient. If value is none, no traps are sent to this recipient. Value can also be
a combination of ‘S’ (SNMP), ‘R’ (RMON) and ‘E’ (ENTERPRISE). For example,
trap=SR means that SNMP and RMON traps will be sent via email to the recipient.
If this option is not defined, the recipient will have a default value of “all”
events – [optional] this is the event filter. Value can be “all” - all event severity types will
be sent to recipient, “none” - no event will be sent to recipient or a combination of
‘I’ (informational), ‘A’ (activity), ‘C’ (critical), ‘F’ (fatal) and ‘D’ (debug). With
“event=ACF” implies that events of severity types activity, critical and fatal will be
sent to recipients by email. If this option is not defined, a value of “all” is taken
ip – [optional] SMTP server IP address. This is the SMTP server to connect to for this
particular user. If this option is not defined, the global/default SMTP server is used
port – [optional] TCP port of the SMTP server. If this is not defined, the global default
TCP port is used
Syntax delete id=<1-5>
-
delete the specific id specified. The deleted id no longer receives the traps via email.
The id is added using the “add” command
Syntax sendmail server=<ip-addr> to=<email-addr> from=<email-addr>
subject=<string> body=<string> - customize (and also to send a test email to check SMTP
settings) the email sent out by specifying the email subject field, server address, to field and the body of the
text. See example fo the body of the text message later in this chapter
server – [mandatory] SMTP server IP v4 address.
to – [mandatory] the recipient email address
from – [mandatory] the sender email address.
subject – [mandatory] email subject or title
body – [mandatory] email body
Syntax server ip=<ip-addr> [port=<1-65535>] [retry=<0-3>] – configure the global SMTP server
settings
ip – [mandatory] SMTP server IP address
port – [mandatory] TCP port to be used for SMTP communications – default is 25
241