Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Magnum6K25# show ip-access
==========================================================================
IP Address | Mask | Telnet | Web | SNMP |
==========================================================================
192.168.5.0 255.255.255.0 ALLOWED DENIED DENIED
192.168.15.25 255.255.255.255 ALLOWED DENIED DENIED
FIGURE 56 – Steps to allow deny or remove specific services
List of commands in this chapter
Syntax set password – set or change password
Syntax configure port-security – sets the port authorization based on MAC addresses
Syntax port-security – configure port security settings
Syntax allow mac=<address|list|range> port=<num|list|range> - specify a specific
MAC address or MAC address list
Syntax learn port=<number-list> <enable|disable> - learn MAC addresses connected to the
Magnum 6K switch
Syntax show port-security – display port security settings
Syntax action port=<num|list|range> <none|disable|drop> - action to perform in case of
breach of port security
Syntax signal port=<num|list|range> <none|log|trap|logandtrap> - port to monitor
and signal to send in case of breach of port security
Syntax ps <enable|disable> - enable or disable port security
Syntax remove mac=<all|address|list|range> port=<num|list|range> - remove a
MAC address entry
Syntax show log [fatal|alert|crit|error|warn|note|info|debug] – display logs and
specific types of logs
Syntax clear log [fatal|alert|crit|error|warn|note|info|debug] – clear logs or specific
type of logs
Syntax set logsize size=<1-1000> - set the log buffer size
Syntax access – setup access configuration parameters
Syntax allow ip=<ipaddress> mask=<netmask> service=<name|list> - allow specific
IP address or range of addresses as a trusted host(s)
Syntax deny ip=<ipaddress> mask=<netmask> service=<name|list> - deny specific
IP address or range of IP addresses
Syntax remove ip=<ipaddress> mask=<netmask> - delete a specific IP address from the
access or trusted host list
75