Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Query response interval successfully set
Magnum6K25(igmp)## show igmp
IGMP State : Enabled
ImmediateLeave : Disabled
Querier : Disabled
Querier Interval : 125
Querier Response Interval : 11
FIGURE 119 – Configuring IGMP
For setting IGMP L2 mode, make sure the set of commands listed below are executed on all the
Magnum switches participating in the L2
Magnum 6K25# igmp
Magnum 6K25(igmp)## mode L2
IGMP set to L2 Mode.
Magnum 6K25(igmp)## show igmp
IGMP State : Disabled
ImmediateLeave : Disabled
Querier : L2 Mode
Querier Interval : 125
Querier Response Interval : 10
Multicasting unknown streams : Disabled
Magnum 6K25(igmp)## mode normal
IGMP set to Normal Mode.
Magnum 6K25(igmp)## exit
Magnum 6K25#
FIGURE 120 - Setting IGMP-L2
List of commands in this chapter
Syntax igmp – IGMP configuration mode
Syntax igmp <enable/disable> - enable or disable IGMP on the switch
Syntax show igmp – IGMP operation status
Syntax mcast <enable | disable> - enable or disable unknown multicast streams. The default is enabled
207