Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Syntax setqos type=<port|tag|tos|none> port=<port|list|range> [priority=<high|low>]
[tos=<0-63|list|range>][tag=<0-7|list|range>] - depending on the type of QOS, the
corresponding field has to be set. For example, for QOS type tag, the tag levels have to be set, and for
QOS type ToS, the ToS levels have to be set. If the priority field is not set, it then defaults to low priority.
ToS has 64 levels and the valid values are 0-63 and a tagged packet has 8 levels and the valid values are
0-7.
Syntax set-weight weight=<0-7> - sets the port priority weight for All the ports. Once the weight is set, all
the ports will be the same weight across the switch. The valid value for weight is 0-7
Syntax show-portweight - display the weight settings on a port
Syntax show qos [type=<port|tag|tos>] [port=<port|list|range>] – displays the QoS settings
Syntax set-untag port=<port|list|range> priority=<high|low> tag=<0-7> - The 802.1p user
priority assigned to untagged received packets to be transmitted as tagged from the priority queue
Chapter 16 - IGMP
Syntax igmp – IGMP configuration mode
Syntax igmp <enable/disable> - enable or disable IGMP on the switch
Syntax show igmp – IGMP operation status
Syntax mcast <enable | disable> - enable or disable unknown multicast streams. The default is enabled
Syntax set igmp mode= <normal|l2> - set the IGMP mode. Normal is when a L3 device is in the
network and is the IGMP root. The IGMP-L2 is used when there is no L3 device in the network
Syntax show-group – shows the multicast groups
Syntax set-port port=< port|list|range> mode=<auto|forward|block> - set the port
characteristics. Block drops the unregistered multicasts. Forward forwards unregistered multicasts
Syntax show-port – display the port characteristics for IGMP
Syntax show-router – displays detected IGMP-enabled router ports
Syntax set-leave <enable|disable> - enables or disables the switch to immediately process a host sending a
leave message rather that wait for the timer to expire
Syntax set-querier <enable|disable> - enables or disables a switch as IGMP querier
271