Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Command Description
start vlan=<name|number|list|range> activate the VLAN configuration
static vlan=<VID> convert a dynamic VLAN to a static VLAN
statistics def-owner=<string> def-
comm=<string>
define the RMON statistics group and the
community string associated with the group
stp STP Configuration mode
stp <enable|disable> Start (Enable) or stop (Disable) STP
sync [hour=<0-24>] [min=<0-59>] setup the frequency at which the SNTP server is
queried
tacplus <enable|disable> [
order=<tac,local | local,tac>]
enable or disable TACACS authentication,
specifying the order in which the server or local
database is looked up where “tac,local” implies,
first the TACAS+ server, then local logins on
the device
tacserver <add|delete> id=<num>
[ip=<ip-addr>] [port=<tcp-
port>]
[encrypt=<enable|disable>]
[key=<string>]
[mgrlevel=<level>]
[oprlevel=<level>]
adds a list of up to five TACACS+ servers
where
<add|delete> – [mandatory] adds or
delete a TACACS+ server.
id=<num> – [mandatory] the order in
which the TACACS+ servers should be
polled for authenticaton
[ip=<ip-addr>] – [mandatory for add]
the IP address of the TACACS+ server
[port=<tcp-port>] – [optional for add]
TCP port number on which the server is
listening
[encrypt=<enable|disable>] –
[optional for add] enable or disable packet
encryption
[key=<string>] – [optional for add,
mandatory with encrypt] when encryption
is enabled, the secret shared key string
must be supplied
[mgrlevel=<level>] and
[oprlevel=<level>] – [optional] specifies
the manager and operator level as defined
on the TACACS+ server for the
respective level of login
telnet <enable|disable> enable or disable telnet sessions
telnet <ipaddress> [port=<port
number>]
telnet from the switch. The IP address can be an
IPv4 address or an IPv6 address
295