Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Magnum6K25# snmp
Magnum6K25(snmp)## setvar sysname=Core
System variable(s) set successfully
Magnum6K25(snmp)## exit
Magnum6K25# set prompt $n
Core# set prompt $n$b$i
Core 192.168.5.5# set prompt $n$b$i$b
Core 192.168.5.5 # snmp
Core 192.168.5.5 (snmp)## setvar sysname=Magnum6K25
System variable(s) set successfully
Core 192.168.5.5 (snmp)## exit
Core 192.168.5.5 # set prompt $b$b$i$b
192.168.5.5 # set prompt $n$b$i$b
Magnum6K25 192.168.5.5 #
Magnum6K25 192.168.5.5 #
Magnum6K25 192.168.5.5 #
Magnum6K25 192.168.5.5 # set prompt Some$bthing$i
Some thing192.168.5.5# set prompt Some$bthing$b$i
Some thing 192.168.5.5#
FIGURE 135 – Setting custom prompts
Ping
Ping command can be used from MNS-6K to test connectivity to other devices as well as
checking to see if the IP address is setup correctly. The command is
Syntax
ping <ipaddress> [count=<1-999>] [timeout=<1-256>] – use the ping command to test
connectivity
Magnum6K25# ping 67.109.247.202
67.109.247.202 is alive, count 1, time = 40ms
Magnum6K25# ping 67.109.247.202 count=3
67.109.247.202 is alive, count 1, time = 20ms
67.109.247.202 is alive, count 2, time = 20ms
67.109.247.202 is alive, count 3, time = 40ms
Magnum6K25#
FIGURE 136 – Using the ping command
247