Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Command Description
set-untag port=<port|list|range>
priority=<high|low> tag=<0-7>
The 802.1p user priority assigned to untagged
received packets to be transmitted as tagged from
the priority queue
setvar
[sysname|syscontact|syslocation]=<stri
ng>
set the system name, contact and location
information
setvar
[sysname|syscontact|syslocation]=<stri
ng>
sets the system name, contact and location. All
parameters are optional but a user must supply
at least one parameter
set-weight weight=<0-7> sets the port priority weight for All the ports.
Once the weight is set, all the ports will be the
same weight across the switch. The valid value
for weight is 0-7
show address-table displays which mac address is associated with
which port for packet switching
show active-stp status whether STP or RSTP is running
Show active-snmp display the version of SNMP currently in use
show alarm displays the current status of Alarm system
show auth <config|ports> show the 802.1x configuration or port status
show backpressure display backpressure buffers
show config show setup parameters configured
show console displays the console settings
show date displays the date
show dualhome Display dual-homing status
show flowcontrol display flow control buffers
show ftp display the current ftp operation mode
show gvrp shows whether GVRP is disabled, along with
the current settings for the maximum number of
VLANs and the current Primary VLAN
show history show the last 25 commands executed – if less
than 25 commands are executed, only those
commands executed are shown
291