Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Syntax telnet <IPv6 address> - telnet to an IPv6 station
Chapter 5 – Access
Considerations
Syntax set password – set or change password
Syntax configure port-security – sets the port authorization based on MAC addresses
Syntax port-security – configure port security settings
Syntax allow mac=<address|list|range> port=<num|list|range> - specify a specific MAC
address or MAC address list
Syntax learn port=<number-list> <enable|disable> - learn MAC addresses connected to the
Magnum 6K switch
Syntax show port-security – display port security settings
Syntax action port=<num|list|range> <none|disable|drop> - action to perform in case of breach
of port security
Syntax signal port=<num|list|range> <none|log|trap|logandtrap> - port to monitor and
signal to send in case of breach of port security
Syntax ps <enable|disable> - enable or disable port security
Syntax remove mac=<all|address|list|range> port=<num|list|range> - remove a MAC
address entry
Syntax show log [fatal|alert|crit|error|warn|note|info|debug] – display logs and specific types
of logs
Syntax clear log [fatal|alert|crit|error|warn|note|info|debug] – clear logs or specific type of
logs
Syntax set logsize size=<1-1000> - set the log buffer size
Syntax access – setup access configuration parameters
262