Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Add User
To add a user, use the command “add” as shown below. The user name has to be a
unique name and can be up to 24 characters long. The password is recommended to be at
least 8 characters long with a mix of upper case, lower case, numbers and special
characters.
Syntax add user=<name> level=<number>
Magnum6K25# user
Magnum6K25(user)## add user=peter level=2
Enter User Password:******
Confirm New Password:******
Magnum6K25(user)##
FIGURE 7 - Adding a user with Manager level privilege
In this example, user ‘peter’ was added with Manager privilege.
Delete User
Syntax delete user=<name>
Magnum6K25(user)##delete user=peter
Confirm User Deletion(Y/N): Y
User successfully deleted
Magnum6K25(user)##
FIGURE 8 - Deleting a user
In this example, user ‘peter’ was deleted.
Modify Password
Syntax passwd user=<name>
Magnum6K25(user)## passwd user=peter
Enter New Password:******
Confirm New Password :******
Password has been modified successfully
Magnum6K25(user)##
FIGURE 9 - Changing the password for a specific user
In this example, password for ‘peter’ was modified.
Modify the Privilege Level
Syntax chlevel user=<name> level=<number>
29