GarrettCom MNS-6K Switch User Manual


 
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Magnum6K25(auth)## show-port backend
Port Supp Timeout Server Timeout Max Request
(sec) (sec)
=================================================
1 30 30 2
2 45 60 5
3 30 30 2
4 30 30 2
5 30 30 2
6 30 30 2
7 30 30 2
8 30 30 2
9 30 30 2
10 30 30 2
11 30 30 2
12 30 30 2
13 30 30 2
14 30 30 2
15 30 30 2
16 30 30 2
Magnum6K25(auth)## portaccess port=2 quiet=120 maxreauth=7 transmit=120
Successfully set port access parameter(s)
Magnum6K25(auth)## show-port access
Port Quiet Period Max Reauth Tx Period
(sec) (sec)
=================================================
1 60 2 30
2 120 7 120
3 60 2 30
4 60 2 30
5 60 2 30
6 60 2 30
7 60 2 30
8 60 2 30
9 60 2 30
10 60 2 30
11 60 2 30
12 60 2 30
13 60 2 30
14 60 2 30
15 60 2 30
16 60 2 30
Magnum6K25(auth)## reauth port=1 status=enable period=300
Successfully set re-authentication parameter(s)
Force the authentication
period on port #1 every 5
minutes – all other ports
are force authenticated
every hour as the show-
port reauth command
shows.
The amount of time, in seconds, the
supplicant is held after an
authentication failure before the
authenticator retries the supplicant
for connection is changed to 120
seconds, the number of re-
authentication attempts that are
permitted before the Port becomes
Unauthorized is set to 7 and the
time in seconds the authenticator
waits to transmit another request
for identification from the
supplicant is changed to 120
seconds. These values can be
changed on all ports depending on
devices bein
g
authen
t
icated.
The authenticator waits for the
supplicant to respond back for 45
seconds; the authenticator waits for
60 seconds for the backend
RADIUS server to respond back
and the authenticator will
retransmit an EAP request packet
5 times to the Supplicant before it
times out the authentication session
83