Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
interaction shows how VLANs 10, 20, 30 are added to port 14 and the VLANs activated. A typical use
for such a port would be to connect a “dumb” switch to this port and allow traffic from three different
VLANs to pass through transparently to the “dumb” switch, which will be connected to port 14. Note
in this example, VLAN information is not propagated on to the “dumb” switch.
Magnum6K25# set vlan type=port
VLAN set to Port-based.
Magnum6K25# vlan type=port
Magnum6K25(port-vlan)## add id=10 name=engineering port=14
Vlan added successfully with
Vlan id : 10
Vlan name : engineering
Ports : 14
Magnum6K25(port-vlan)## add id=20 name=engineering port=14
ERROR - Duplicate Vlan name
Magnum6K25(port-vlan)## add id=20 name=sales port=14
Vlan added successfully with
Vlan id : 20
Vlan name : sales
Ports : 14
Magnum6K25(port-vlan)## add id=30 name=marketing port=14
Vlan added successfully with
Vlan id : 30
Vlan name : marketing
Ports : 14
Magnum6K25(port-vlan)## show vlan type=port
VLAN ID : 1
Name : Default VLAN
Status : Active
========================
PORT | STATUS
========================
9 | UP
10 | DOWN
11 | DOWN
12 | DOWN
13 | UP
14 | DOWN
15 | DOWN
16 | DOWN
Notice
–
each VLAN needs a
unique name – here by mistake,
VLAN 10 and 20 had the same
name.
E
nter the VLAN configuration
mod
e
109