Filter
Top Products
Load an original on the glass
You can copy, scan, or fax up to letter-, A4-, or legal-size single-page originals by
loading them on the glass, as described here. If your original contains multiple full-size
pages, load it in the automatic document feeder. For more information, see Load an
original in the automatic document feeder.
You should also follow these instructions when loading a proof sheet on the glass for
photo printing. If your proof sheet contains multiple pages, load each page on the glass
one at a time. Do not load a proof sheet in the automatic document feeder.
Note Many of the special features will not work correctly if the glass and lid backing
are not clean. For more information, see Clean the HP all-in-one.
To load an original on the glass
1 Remove all originals from the document feeder tray, and then lift the lid on the
HP all-in-one.
2 Place your original face down on the right front corner of the glass.
If you are loading a proof sheet, make sure the top of the proof sheet is lined up
against the right edge of the glass.
Tip For more help on loading an original, refer to the guides along the front and
right edges of the glass.
3 Close the lid.
Choose papers for printing and copying
You can use many types and sizes of paper in your HP all-in-one. Review the following
recommendations to get the best printing and copying quality. Whenever you change
paper types or sizes, remember to change those settings.
Recommended papers
If you want the best print quality, HP recommends using HP papers that are specifically
designed for the type of project you are printing. If you are printing photos, for example,
User Guide 31
Load originals and load paper