Filter
Top Products
You can increase the privacy of data on your memory cards by establishing a WEP
(Wired Equivalent Privacy) key or WPA/PSK (Wi-Fi Protected Access/Pre-Shared Key) )
on your wireless network or by setting the HP all-in-one so it never shares an inserted
memory card with networked computers, wireless or not. This means that other
computers on your network will also not be able to access the files on the memory
card.
For more information on adding encryption to a wireless network, see the Network
Guide.
Note The HP all-in-one never shares the contents of a memory card in a digital
camera that is connected to the HP all-in-one through the camera port.
1 Press Setup.
2 Press 8, and then press 3.
This displays the Network menu and then selects Advanced Setup.
3 Press 3 to select Memory Card Security.
4 Press the number next to the desired security option:
– 1. Share Files
– 2. Do Not Share Files
Transfer digital images to your computer
After you take photos with your digital camera, you can print them immediately or save
them directly to your computer. To save them to your computer, you need to remove the
memory card from the camera and insert it in the appropriate memory card slot on the
HP all-in-one.
Note You can only use one memory card in your HP all-in-one at a time.
1 Insert the memory card into the appropriate slot on your HP all-in-one.
When the memory card is inserted correctly, the status light next to the memory
card slots begins to blink. Reading photos... appears on the color graphics
display. The status light next to the memory card slots blinks green when the card
is being accessed.
If you insert a memory card incorrectly, the status light next to the memory card
slots blinks amber and the color graphics display shows an error message such as
Card is in backwards or Card is not fully inserted.
Warning Never attempt to remove a memory card while it is being
accessed. Doing so can damage files on the card. You can safely remove a
card only when the status light next to the memory card slots is not blinking.
2 If there are photo files on the memory card that have never been transferred
before, a dialog box on your computer asks whether you want to save the photo
files to your computer.
If the HP all-in-one is on a network, in the Photo area, press Menu to display the
Photo Menu, press 3 to select Transfer to computer, and then select your
computer from the displayed list. Return to your computer and follow the onscreen
prompts.
3 Click the option to save.
This saves all the new photos from the memory card to your computer.
User Guide 41
Memory Card and PictBridge