Filter
Top Products
Warning In order to make a borderless copy, you must have photo paper (or
other specialty paper) loaded. If the HP all-in-one detects plain paper in the
input tray, it will not make a borderless copy. Instead, your copy will have
borders.
Note This feature will not work correctly if the glass and lid backing are not clean. For
more information, see Clean the HP all-in-one.
1 Load letter or A4 photo paper in the input tray.
If your HP all-in-one has more than one input tray, you might need to select the
correct input tray. See Select an input tray for copying for more information.
2 Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
3 In the Copy area, press Reduce/Enlarge, and then press 4.
This displays the Reduce/Enlarge menu and then selects Fill Entire Page.
4 Press Start Copy Color.
Tip If the output is not borderless, then set the paper size to 5x7 Borderless or
4x6 Borderless, set the paper type to Photo Paper, set the Photo
enhancement, and then try again.
For more information on setting the paper size, see Set the copy paper size.
For information on setting the paper type, see Set the copy paper type.
For information on setting the Photo enhancement, see Enhance light areas
of your copy.
Copy a photo several times on one page
You can print multiple copies of an original on one page by selecting an image size from
the Reduce/Enlarge option in the Copy Menu.
After you select one of the available sizes, you might be prompted whether you want to
print multiple copies of the photo to fill the paper you have loaded in the input tray.
User Guide 61
Use the copy features