Filter
Top Products
Note Do not take the paper out of the tray until both sides of the copy are
complete.
Collate copies
You can use the Collate feature to produce sets of copies in the exact order that they
are scanned from the document feeder tray. You must copy more than one original to
use the collate feature.
Note The collate feature is available only on certain models.
To collate copies from the control panel
1 Make sure you have paper loaded in the input tray.
2 Load your originals face up in the document feeder tray with the top of the page on
the left.
Tip Larger collate projects might exceed the memory of your HP all-in-one. Try
breaking large collate projects into smaller jobs. Copy fewer pages at a time,
and then group the pages together.
3 In the Copy area, press Collate.
This displays the Collate Menu.
4 Press 1, then press OK.
This selects On and closes the Collate Menu.
5 Press Start Copy Black or Start Copy Color.
4
3
2
1
4
3
2
1
4
3
2
1
Copy two originals on one page
You can print two different originals on one page using the 2 on 1 feature. The copied
images will appear side by side on the page in a landscape format.
To copy two originals on one page from the control panel
1 Make sure you have paper loaded in the input tray.
2 Load your letter- or A4-sized originals in the document feeder tray. Place the pages
so that the top of the document goes in first.
3 In the Copy area, press Reduce/Enlarge, and then press 8.
This displays the Reduce/Enlarge menu and then selects 2 on 1.
4 Press Start Copy Black or Start Copy Color.
Make a 10by 15cm (4by 6inch) borderless copy of a
photo
For the best quality when copying a photo, load photo paper in the input tray and
change your copy settings for the correct paper type and photo enhancement. You
might also want to use the photo print cartridge for superior print quality. With the tri-
User Guide 59
Use the copy features