Filter
Top Products
Setting Description
6. Layout Style Lets you select one of three layout styles for the current
print job.
The Paper Saver layout fits as many photos on the
paper as possible, rotating and cropping photos if
necessary.
The Album layouts keep the orientation of the original
photos. Album refers to the orientation of the page, not
the photos themselves. Some cropping might occur.
7. Smart Focus Lets you enable or disable automatic digital sharpening
of photos. Smart Focus affects only printed photos. It
does not change the appearance of photos on the color
graphics display or the actual image file on the memory
card. Smart Focus is enabled by default.
8. Digital Flash Lets you make dark photos appear lighter. Digital Flash
affects only printed photos. It does not change the
appearance of photos on the color graphics display or
the actual image file on the memory card. Digital Flash
is turned off by default.
9. Set New Defaults Lets you save the current Print Options settings as the
new defaults.
Change print options
You change each of the Print Options menu settings in the same way.
1 In the Photo area, press Menu, 1, and then press the number next to the setting
you want to change. You can scroll through the Print Options menu by pressing
on the control panel to see all the options.
The currently selected option is highlighted, and its default setting (if any) appears
below the menu, at the bottom of the color graphics display.
2 Make the change to the setting, and then press OK.
Note In the Photo area, press Menu again to exit the Print Options menu and
return to the photo display.
For information on setting default photo print options, see Set new photo print options
defaults.
Set new photo print options defaults
You can change the photo print options defaults from the control panel.
1 In the Photo area, press Menu, and then press 1.
The Print Options menu appears.
2 Make changes to any options as needed.
The Print Options menu reappears when you confirm a new setting for any
option.
3 Press 9 when the Print Options menu is showing, and then press OK when
prompted to set new defaults.
Chapter 6
46 HP Officejet 7300/7400 series all-in-one
Memory Card and PictBridge