3. Insert the tool under the separation pad.
Figure 2-10 Remove the separation pad (Tray 1) (3 of 4)
4. Rotate the top of the tool away from the product to release the separation pad, and then remove
the tool and the separation pad together.
Figure 2-11 Remove the separation pad (Tray 1) (4 of 4)
Reinstallation tip You do not need to use the tool to install the new separation pad. Press the new
pad with your hand until it snaps into place and engages with the engine.
96 Chapter 2 Removal and replacement ENWW