6. Disconnect one connector (callout 1), and then release the wire harness from the guide (callout 2).
TIP: It might be easier to disconnect the connector, if you release it from the black-plastic holder.
Figure 2-121 Remove the fuser gear assembly (6 of 9)
1
2
1
7. Disconnect two connectors (callout 1), and then release the wire harness from the retainer and
guide (callout 2).
Figure 2-122 Remove the fuser gear assembly (7 of 9)
1
2
ENWW
Removal and replacement procedures
179