Filter
Top Products
Table 3-39 Manage Trays menu (continued)
First level Values Description
Manually Feed Prompt Always*
Unless loaded
This option controls whether a manual feed
message should appear when the type or
size for a job does not match the size or type
configured for Tray 1. Two options are
available:
Always: A prompt always appears before
printing a manual-feed job.
Unless loaded: A message appears only if
the multipurpose tray is empty or does not
match the size or type of the job.
Size/Type Prompt Display*
Do not display
This option controls whether the tray
configuration message appears whenever a
tray is closed. Two options are available:
Display: This option shows the tray
configuration message when a tray is closed.
You can configure the tray size or type
directly from this message.
Do not display: This option prevents the
tray configuration message from
automatically appearing.
Use another tray Enabled*
Disabled
This option turns on or off the control-panel
prompt to select another tray when the
specified tray is empty.
Alternative Letterhead Mode Disabled*
Enabled
When this option is On you can load
letterhead or preprinted paper the same way
for every job, whether printing on one or
both sides of the page.
This option is available only for models that
have automatic duplexing.
ENWW
Tools for troubleshooting
389