Right-door assembly
Remove the following components:
●
Rear cover (see
Rear cover on page 116)
●
Right rear cover (see
Right-rear cover on page 119)
1. Open the right-door assembly
2. Remove one screw (callout 1), release the link arm (callout 2), and then disconnect two connectors
(callout 3).
NOTE: The link arm is spring loaded and retracts into the product.
Figure 2-46 Remove the right-door assembly (1 of 6)
2
1
3
126 Chapter 2 Removal and replacement ENWW
Connectors J152 and J112 on the DC Controller.