Tray/Bin manual sensor test
Use this test to test the tray and bin sensors and switches manually. The following illustrations and table
show the locations of these sensors.
1. Press the Home button
.
2. Open the following menus:
●
Administration
●
Troubleshooting
●
Diagnostic Tests
3. Press the Down arrow
to highlight the Tray/Bin Manual Sensor Test item, and then press
the OK button.
Table 3-21 Tray/Bin manual sensor test
Sensor or switch name Sensor or switch number
Tray 1 paper sensor PS2
Tray 2 paper sensor PS1
Tray 2 paper surface sensor PS4
Tray 2 paper size switches SW7 and SW 8
Tray 3 paper sensor SR3
Tray 3 paper surface sensor SR2
Tray 3 paper size switches SW2 and SW3
Tray 3 feed sensor SR1
Tray 3 door opening/closing sensor SW1
Tray 4 paper sensor SR3
Tray 4 paper surface sensor SR2
Tray 4 paper size switches SW2 and SW3
Tray 4 feed sensor SR1
Tray 4 opening/closing sensor
1
SW1
Tray 5 paper sensor SR83
Tray 5 paper surface sensor SR82
Tray 5 paper size switches SW82 and SW83
Tray 5 feed sensor SR81
Tray 5 opening/closing sensor
1
SW1
Tray 6 paper sensor SR93
Tray 6 paper surface sensor SR92
300 Chapter 3 Solve problems ENWW