Filter
Top Products
Table 3-41 Embedded Jetdirect (continued)
First level Second level Third level Fourth level Fifth level Values Description
Proxy Port Default =
00080
Type the port number used by
the proxy server for client
support. The port number
identifies the port reserved for
proxy activity on your network,
and can be a value from 0 to
65535.
Idle Timeout Default = 0270 Idle Timeout: The time
period, in seconds, after which
an idle TCP print data
connection is closed (default is
270 seconds, 0 disables the
timeout).
Security Secure Web HTTPS
Required*
HTTPS
Optional
For configuration management,
specify whether the embedded
Web server will accept
communications using HTTPS
(Secure HTTP) only, or both
HTTP and HTTPS.
HTTPS Required: For secure,
encrypted communications,
only HTTPS access is accepted.
The print server will appear as
a secure site.
HTTPS Optional: Access
using either HTTP or HTTPS is
permitted.
IPSEC Keep
Disable*
Specify the IPSec status on the
print server.
Keep: IPSec status remains the
same as currently configured.
Disable: IPSec operation on
the print server is disabled.
802.1x Reset
Keep*
Specify whether the 802.1X
settings on the print server are
reset to the factory defaults.
Reset: The 802.1X settings
are reset to the factory defaults.
Keep: The current 802.1X
settings are maintained.
ENWW
Tools for troubleshooting
395