Filter
Top Products
Table 3-44 Calibration/Cleaning menu (continued)
First level Second level Values Description
Full Calibration Performs all product calibrations.
Delay Calibration at
Wake/Power On
Disabled
Enabled*
This menu controls the timing of
the calibration when the product
wakes up or is turned on.
Select No to have the product
calibrate immediately when it
wakes up or is turned on. The
product will not print any jobs
until it finishes calibrating.
Select Yes to enable a product
that is asleep to accept print jobs
before it calibrates. It may start
calibrating before it has printed
all the jobs it has received. This
option allows quicker printing
when coming out of sleep mode
or when you turn the product on,
but print quality might be
reduced.
For best results, allow the
product to calibrate before
printing. Print jobs performed
before calibration might not be
of the highest quality.
USB Firmware Upgrade menu
To display: At the product control panel, select the Device Maintenance menu, and then select the
USB Firmware Upgrade menu.
Insert a USB storage device with a firmware upgrade bundle into the USB port, and follow the on-
screen instructions.
408 Chapter 3 Solve problems ENWW