Filter
Top Products
USB storage device (Preboot menu)
1.
Copy the xxxxxxx.bdl file to a portable USB flash memory storage device (thumb drive).
2. Turn the product on.
3. Press the Stop button when the Ready, Data and Attention LEDs illuminate solid.
4. Press the down arrow
button to highlight Administrator, and then press the OK button.
5. Press the down arrow
button to highlight Download, and then press the OK button.
6.
Insert the portable USB storage device with the xxxxxxx.bdl file on it.
NOTE: If the error message No USB Thumbdrive Files Found appears on the control-panel
display, you might need to connect the storage device to the external USB connection on the
formatter or try using a different portable storage device.
7. Press the down arrow button to highlight USB Thumb Drive, and then press the OK button.
8.
Press the down arrow
button to highlight thexxxxxxx.bdl file, and then press the OK button.
NOTE: The upgrade process can take up to 10 minutes to complete.
TIP: If there is more than one xxxxxxx.bdl file on the storage device, make sure that you
select the correct file for this product.
9. When the message Complete appears on the control-panel display, press the Back button 3
times.
10. When the message Continue appears on the control-panel display, press the OK button. The
product will initialize.
11. When the upgrade process is complete, print a configuration page and verify that the upgrade
firmware version was installed. See
Configuration page on page 350 and Determine the installed
revision of firmware on page 547.
548 Chapter 3 Solve problems ENWW