Filter
Top Products
Preboot menu options
If an error occurs while the product is booting, an error message appears on the control-panel display.
The user can access the Preboot menus. The Error menu item will not be seen if an error did not occur.
Access the Preboot menu
1. Turn the product on.
2. Press the Stop
button when the Ready, Data, and Attention LEDs are illuminated solid.
3. Use the Down arrow
button to navigate the Preboot menu options.
4. Press the OK button to select a menu item.
Cold reset using the Preboot menu
1. Turn the product on.
2. Press the Stop
button when the Ready, Data, and Attention LEDs are illuminated solid.
3. Use the Down arrow
button to highlight Administrator, and then press the OK button.
4. Use the Down arrow
button to highlight Startup Options, and then press the OK button.
5. Use the Down arrow
button to highlight Cold Reset, and then press the OK button.
6. Press the Back button twice to highlight Continue, and then press the OK button.
NOTE: The product will initialize.
Table 3-63 Preboot menu options (1 of 5)
Menu option First level Second level Third level Description
Continue Selecting theContinue item exits the Preboot menu and
continues the normal boot process.
If a selection is not made in the initial menu within 30 seconds,
the product returns to a normal boot (the same as selecting
Continue.
If the user navigates to another menu, the timeout does not
apply.
Sign In Enter the Administrator PIN or Service PIN if one is required to
access the Preboot menu.
540 Chapter 3 Solve problems ENWW