Filter
Top Products
Table 3-31 Trays menu
First level Second level Values Description
Manage Trays Use Requested Tray Exclusively*
First
Use this feature to control how
the product handles jobs that
have specified a specific input
tray.
Manually Feed Prompt Always*
Unless loaded
Use this feature to indicate
whether a prompt should appear
when the type or size for a job
does not match the specified tray
and the product pulls from the
multipurpose tray instead.
Size/Type Prompt Display*
Do not display
Use this feature to control
whether the tray configuration
message appears whenever a
tray is closed.
Use another tray Enabled*
Disabled
Use this feature to turn on or off
the control-panel prompt to select
another tray when the specified
tray is empty.
Alternative Letterhead
Mode
Disabled*
Enabled
Use this feature so that you can
load letterhead or preprinted
paper into the tray the same way
for all print jobs, whether you
are printing to one side of the
sheet or to both sides of the
sheet.
Blank Pages Auto*
Yes
Use this feature to control how
the product handles two-sided
jobs (duplexing).
Auto: This option enables Smart
Duplexing, which instructs the
product not to process blank
pages.
Yes: This option disables Smart
Duplexing and forces the
duplexer to flip the sheet of
paper even if it is printed on only
one side.
Override A4/Letter Yes*
No
Use this feature to print on letter-
size paper when an A4 job is
sent but no A4-size paper is
loaded in the product (or to print
on A4 paper when a letter-size
job is sent but no letter-size
paper is loaded).
364 Chapter 3 Solve problems ENWW