Paper pickup assembly
Before proceeding, remove the following components:
●
Tray 2 cassette.
●
Tray 2 separation roller assembly. See
Separation roller assembly (Tray 2) on page 97.
●
ITB. See
Intermediate transfer belt (ITB) on page 102.
Remove the paper pickup assembly
1. Open the right door, pull out one tab (callout 1), pull the bottom of the cable cover out, and then
pull up to remove the cable cover (callout 2).
Figure 2-58 Remove the paper pickup assembly (1 of 3)
2
1
ENWW
Removal and replacement procedures
135