Filter
Top Products
◦
13.B2.DZ (event code)
Late to registration jam, from tray <Z>
This jam occurs when the paper does not reach the TOP sensor in the designated amount of time
after the Tray 3 feed sensor sensed the leading edge at printing from Tray 3, 4, 5, or 6.
Z = source tray
◦
13.B9.DD (event code)
Late to fuser jam, from duplexer
This jam occurs when the paper does not reach the fuser output sensor in designated amount of
time.
Recommended action
Clear the jam. See the clear jams section in the service manual.
13.WX.YZ Jam in Tray 1
Description
◦
13.B2.D1 (event code)
Late to registration jam, from Tray 1
This jam occurs when the paper does not reach the TOP sensor in designated amount of time from
the start of paper pickup at printing from Tray 1 and duplex printing.
Recommended action
Clear the jam. See the clear jams section in the service manual.
13.WX.YZ Jam in Tray <X>
Description
◦
13.B2.D2 (event code)
Misfeed jam from Tray 2
This jam occurs when the paper does not reach the TOP sensor in designated amount of time from
the start of paper pick-up at printing from Tray 2 and duplex printing.
◦
13.A3.D3 (event code)
Misfeed jam from Tray 3
This jam occurs when the paper does not reach the feed sensor of each tray in designated amount
of time after the start of paper pickup.
◦
13.A4.D4 (event code)
Misfeed from Tray 4
424 Chapter 3 Solve problems ENWW