Filter
Top Products
Table 3-41 Embedded Jetdirect (continued)
First level Second level Third level Fourth level Fifth level Values Description
IPv4 Settings Config
Method
Bootp*
DHCP
Auto IP
Manual
Specifies the method that TCP/
IPv4 parameters will be
configured on the HP Jetdirect
print server.
Use Bootp (Bootstrap Protocol)
for automatic configuration
from a BootP server.
Use DHCP (Dynamic Host
Configuration Protocol) for
automatic configuration from a
DHCPv4 server. If selected and
a DHCP lease exists, DHCP
Release and DHCP Renew
menus are available to set
DHCP lease options.
Use Auto IP for automatic
link-local IPv4 addressing. An
address in the form
169.254.x.x is assigned
automatically.
Default IP Auto IP*
Legacy
Specify the IP address to
default to when the print server
is unable to obtain an IP
address from the network
during a forced TCP/IP
reconfiguration (for example,
when manually configured to
use BootP or DHCP).
This feature assigns a static IP
address that might interfere
with a managed network.
Auto IP: A link-local IP
address 169.254.x.x is set.
Legacy: The address
192.0.0.192 is set, consistent
with older HP Jetdirect
products.
DHCP
Release
Yes
No*
This menu appears if Config
Method is set to DHCP and a
DHCP lease for the print server
exists.
No: The current DHCP lease is
saved.
Yes: The current DHCP lease
and the leased IP address are
released.
392 Chapter 3 Solve problems ENWW