Front-door assembly
1. Remove the control panel. See Right-front cover and control-panel assembly on page 113.
2. Open the front door.
3. Remove one screw (callout 1) and the inner cover rail mount (callout 2).
CAUTION: As shown in Figure 2-43 Remove the front-door assembly (2 of 4) on page 123,
when removing the inner cover rail mount (callout 3), hold down the inner cover (callout 4) with
one hand to prevent it from springing back at the product.
Figure 2-42 Remove the front-door assembly (1 of 4)
1
2
Figure 2-43 Remove the front-door assembly (2 of 4)
3
4
ENWW
Removal and replacement procedures
123