Power-on timing (approximate)
Power-on timing from boot sequence to the Ready state might change as the firmware is upgraded.
●
00.00 seconds; power-button LED illuminates and fans rotate at high speed
●
00.06 seconds; control panel backlight illuminates and engine noises begin
●
00:10 seconds; HP logo appears on the control-panel display, boot sequence count appears on
the control-panel display
Boot sequence
◦
1/8 = 10 seconds
◦
2/8 = 15 seconds
NOTE: Depending on how the product was shut down, the product might stay at this point
for several minutes while the Disk Check process completes.
◦
7/8 = 45 seconds
◦
8/8 = 50 seconds
●
01:30 seconds; fuser fan noise stops and engine noises stop
●
01:50 seconds; product enters the Ready state
ENWW
Troubleshooting process
283