Filter
Top Products
APPENDIX B
COMPONENTS OF END ITEM LIST
Section I. INTRODUCTION
B-1. Scope
This appendix lists integral components of and basic
issue items for the AN/USM-459 to help you in-
ventory items required for safe and efficient
operation.
B-2. General
This Components of End Item List is divided into
the following sections:
a. Section II. Integral Components of the End
Item. These items, when assembled, comprise the
and must accompany it whenever it is transferred or
turned in. The illustrations will help you identify
these items.
b. Section III. Basic Issue Items. These are the
minimum essential items required to place the in
operation, to operate it, and to perform emergency
repairs. Although shipped separately packed they
must accompany the during operation and whenever
it is transferred between accountable officers. The
illustrations will assist you with hard-to-identify
items. This manual is your authority to requisition
replacement BII, based on TOE/MTOE
authorization of the end item.
B-3. Explanation of Columns
a. Illustration. This column is divided as follows:
(1) Figure number. Indicates the figure number
of the illustration on which the item is shown.
(2) Item number. The number used to identify
item called out in the illustration.
b. National Stock Number. Indicates the National
stock number assigned to the item and which will be
used for requisitioning.
c. Description. Indicates the Federal item name
and, if required, a minimum description to identify
the item. The part number indicates the primary
number used by the manufacturer, which controls
the design and characteristics of the item by means
of its engineering drawings, specifications, stan-
dards, and inspection requirements to identify an
item or range of items. Following the part number,
the Federal Supply Code for Manufacturers (FSCM)
is shown in parentheses.
d. Location. The physical location of each item
listed-is given in this column. The lists are designed
to inventory all items in one area of the major item
before moving onto an adjacent area.
e. Usable on Code. Not applicable.
f. Quantity Required (Qty Reqd). This column
lists the quantity of each item required for a com-
plete major item.
g. Quantity. This column is left blank for use
during an inventory. Under the Rcvd column, list
the quantity you actually receive on your major
item. The Date columns are for your use when you
inventory the major item.
B-1