Filter
Top Products
Message Description Recommended Action
PRINTING
CONFIGURATION
PAGE
This message is displayed during the
formatting and printing of the configuration
page printout.
No action required. Press Job Cancel to stop
the test.
PRINTING DEMO
PAGE
Printing a Demonstration Page. No action required.
PRINTING FLASH
PAGE
This message is displayed while the flash
directory page is being formatted and printed.
No action required.
PRINTING FONT
LIST
This message is displayed while the PCL or
PS FONT LIST is being formatted and printed.
No action required.
PROCESSING JOB This message is displayed when the printer is
processing a print job. Asquare will blink on
the right side of the display panel.
No action required.
READY The default message. The printer is ready to
use.
No action required.
RESETTING
ACTIVE I/O
This message is displayed during an Active
I/O Reset.
No action required.
RESETTINGALL
I/O
This message is displayed during an All I/O
Reset.
No action required.
RESTORING
FACTORY
SETTINGS
This message is displayed during a cold reset.
The printer returns all Printing, PCL, Job,
Config, Mem Config, Parallel, Serial, MIO (if
installed), and installed personality (PCL, PS,
etc.) menu settings to their factory default
configurations, except for page count, and
display language.
No action required.
WARMING UP The printer is warming up and is not ready to
accept data.
No action required. Wait until the printer
signals READY.
7-20 Solving Printer Problems EN