Filter
Top Products
HP JetAdmin Utility (Novell Networks)
1 Run JETADMIN.
2 Select the printer you want to configure. It is listed under its
“JetDirect Interface Name” which appears on the self test
page/configuration plot.
3 Click on Printer at the top of the menu.
4 Click on Properties.
5 When the Property Pages appear click on the Security tab.
6 Select the Lock option under Control Panel Lock
7 Click on the OK button.
ASCII PJL Escape Sequence
Password: send this sequence to the printer from any ASCII editor:
E
C
%-12345X@PJL JOB
@PJL DEFAULT PASSWORD=[numeric password (0 to 65535)]
@PJL EOJ
E
C
%-12345X
CPLOCK: to turn on or off, assuming that a password has NOT been
set, send the following ASCII sequence to the printer:
E
C
%-12345X@PJL JOB
@PJL DEFAULT CPLOCK=ON [OFF]
@PJL EOJ
E
C
%-12345X
If a password HAS been set, send the following ASCII sequence to the
printer to turn CPLOCK on or off.:
E
C
%-12345X@PJL JOB PASSWORD=(numeric password)
@PJL DEFAULT CPLOCK=ON(OFF)
@PJL EOJ
E
C
%-12345X
iv EN