Filter
Top Products
Resets Menu
Reset options are available through the Resets Menu. Use the Resets
Menu option with caution.
Note
You can lose buffered page data or printer configuration data when you
select these options. You should only use it in the following
circumstances:
• You want to restore the default printer settings.
• Communication between the printer and computer is interrupted.
• You are using both the serial and parallel I/O ports, and one of the
ports is having problems.
See Figure 3-2, item I for the location of the Resets Menu on the Menu
Map.
Note The printer control panel resets will clear all memory in the printer,
while the [Job Cancel] key only clears the current job.
Menu
Selection
Printer
Response
Explanation
MEMORY RESET CLEARING MEMORY Press [Select] to perform a MEMORY RESET. This will clear the printer buffer
and make the printer control panel defaults current.
FACTORY
DEFAULT
FACTORY DEFAULTS
BEING RESTORED
Press [Select] to perform a FACTORY DEFAULT. This restores most of the
printer’s factory default settings as it performs a simple reset.
Items in the Config, Memory Configuration, Parallel, and Serial Menus are
not reset. MEMORY RESET clears only the active input buffer.
RESETACTIVE
I/O
RESETTING ACTIVE
I/O
Press [Select] to perform an RESET ACTIVE I/O. This clears the input and
output buffers
for the active I/O only
and performs a simple reset.
RESET ALL I/O RESETTING ALL I/O Press [Select] to perform an RESET ALL I/O. This clears the input and
output buffers
for all I/Os
and performs a simple reset.
Table 3-12 Resets Menu Items
3-16 Using the Printer Control Panel EN