Filter
Top Products
Network Security
Note
This information is NOT repeated in this manual.
HP LaserJet 5/5M printers allow you to lock out other users’ abilities to
change most printer control panel settings. This is done by setting a
password and turning the lock command on. To verify, the message
ACCESS DENIED will appear when you enter a change using the printer
control panel.
There are three ways to implement printer security:
1 HP LaserJet Utility for Macintosh users.
2 JetAdmin for Novell networks.
3 PJL escape sequence sent from any ASCII editor.
HP LaserJet Utility (Macintosh)
1 Select the HP LaserJet Utility icon in the HP LaserJet folder on
your hard drive.
2 If necessary, click on the Select Printer button to select the HP
LaserJet 5M.
3 Select the Security panel by scrolling down and clicking on the key icon.
4 Click on the Lock Control Panel button. You will be prompted to
enter a password if the password has been set. If a password has not
been set, go to the next step.
5 Click the Set Password button. On the Printer Security dialog, enter
the new password (numeric values can be set from 0 to 65535), and
click on the OK button.
EN iii