Filter
Top Products
Installing SIMMs
Caution
SIMM boards can be damaged by small
amounts of static electricity. Wear an
antistatic wrist strap (or frequently touch the
surface of the antistatic package or bare
metal on the printer) when handling the
board, and before installing or removing it.
1 Before you begin these steps, turn the
printer off and unplug the power cord.
2 Rotate the printer so that you have
easy access to the right and back sides
of the printer.
3 Loosen the captive screw in the upper
left corner of the back panel with a
Phillips #2 screwdriver. The screw
does not need to be completely
removed from the printer.
4 Slide the right side panel towards the
back of the printer (approximately an
inch (25 mm)).
5 The panel should now easily open,
exposing the SIMM door.
Continued on next page
D
Printer Memory
D
Printer Memory
EN Printer Memory D-7