Filter
Top Products
To Load Envelopes into Tray 1:
1 Open Tray 1 by pulling down on the
top center of the door.
2 Pull out the tray extension until it
snaps into place.
3 Place up to 10 envelopes against the
left side of the tray, print-side up,
with the postage-end in (see
illustration for orientation). Slide the
stack of envelopes into the printer as
far as it will go without forcing it. If
the stack of envelopes jams while
feeding into the printer try reducing
the amount of envelopes in the tray.
4 Slide the paper width guide to the left
until it lightly touches the right side
of the envelope stack without bending
the envelopes.
Note
The paper width guide ensures that
envelopes feed correctly into the printer.
Envelopes must fit squarely and firmly
between the paper width guide and the left
side of Tray 1. If they do not, they may
feed into the printer incorrectly resulting
in a paper jam.
4
Printing
EN Printing 4-17