Filter
Top Products
Loading Tray 2
Tray 2 holds about 250 sheets of 20 lb.
(75 g/m
2
) paper.
To load Tray 2:
1 Pull Tray 2 straight out of the printer.
2 Slide a stack of paper into the tray
until the paper is in solid contact with
the rear of the tray. Do not fill above
the arrows on the left rear of the tray.
Note
See the sections on letterhead and duplex
printing later in this chapter for proper
media orientation for specific jobs.
3 Press down on all four corners of the
paper stack to ensure that the paper
rests flat in the tray and fits under the
front left corner tab.
4 Slide Tray 2 back into the printer.
Caution
Do not remove the tray while the printer
is printing. This could cause a paper jam.
Note
If paper curls or skews excessively when
printed, turn over the stack of paper in
Tray 2.
4-6 Printing EN