Filter
Top Products
Transfer Roller
Before you begin these steps, turn the
printer off and unplug the power cord.
1 Open the top cover and remove the
toner cartridge.
2 Remove the transfer roller hook tool,
located near the left end of the inside
front panel.
3 Lift up on the chrome shaft using the
hook tool.
4 Lift the roller up and out of its
retaining slots. Discard the used
roller.
Caution
Be careful not to touch the black sponge-
rubber on the new transfer roller. Finger
oils on the roller can cause print quality
problems.
5 Slide the right end of the new roller
(the end without the gear) into the
right slot. Press the gear end into the
left slot until it clicks into place.
Replace the transfer roller hook tool and
toner cartridge. Close the top cover. Plug
in the power cord and switch the printer on.
8-12 Maintaining and Adjusting the Printer EN