Filter
Top Products
Note
Step 6 is only necessary if you are
changing the size of the paper or the
weight of the paper in Tray 3. Tray 3
comes preajusted for 20 lb. (75 g/m
2
)
letter sized paper. If you are not changing
paper size or weight, skip to Step 7.
6 Lightly push on the stack of paper to
make sure it moves freely up and
down. Release the tray width guide if
necessary. Adjust the tray spring
tension by turning the tension knob
until the adjustable arrow lines up
with the stationary arrow.
Note
This adjustment may be easier if the tray
is inserted part way into the printer
7 Adjust the tray width guide to rest
firmly against the side of the paper
stack.
8 Slide the full tray back into the Tray 3
assembly.
4
Printing
EN Printing 4-23