Filter
Top Products
User-Replaceable Parts
During the printer warranty period, Hewlett-Packard recommends that
only HP-authorized service technicians service your printer. After the
warranty period, some worn parts can be replaced by the owner. See
Chapter 7, “Solving Printer Problems,” to troubleshoot problems that
may be related to worn user-replaceable parts.
WARNING!
Switch the printer off and unplug before replacing parts. Failure to do
so may result in personal injury or damage to the printer. Allow the
printer to cool for 30 minutes before replacing any parts.
Unless specifically noted, the replacement process is the reverse of
the removal process. Always carefully observe the position and
alignment of the part you are removing; this is your best guide to
replacement.
Ordering Information
User-replaceable parts are available from your authorized HP dealer or
from Hewlett-Packard. To order parts, see the HP Support pages at the
front of this manual.
Part Name Part Number Remarks
110V Maintenance Kit C3916-69001 Kit includes commonly used parts to maintain 110V LaserJet
5/5M printers: Tray 1, Tray 2, and Tray 3 Pickup Rollers, Tray
1 Separation Pad, Transfer roller, 110V Fuser Assembly.
220V Maintenance Kit C3916-69002 Kit includes commonly used parts to maintain 220V LaserJet
5/5M printers: Tray 1, Tray 2, and Tray 3 Pickup Rollers, Tray
1 Separation Pad, Transfer roller, 220V Fuser Assembly.
FusingAssembly C2037-69001 100-127 Volts.
C2037-69002 220-240 Volts.
Optional Tray 3 Pickup Roller RB1-7983-000CN See Chapter 7 for replacement conditions.
Transfer Roller RF5-0349-000CN See Chapter 7 for replacement conditions.
Transfer Roller Tool (hook) RB1-7895-000CN See Chapter 7 for replacement conditions.
Tray 1 Pickup Roller RB1-2205-000CN Replace both the Tray 1 Pickup Roller and the Tray 1
Separation Pad at the same time.
Tray 1 Separation Pad RF5-0343-000CN
Tray 2 Pickup Roller RB1-7911-000CN See Chapter 7 for replacement conditions.
Table 8-1 User-Replaceable Parts
8
Maintaining and
Adjusting the
8
Maintaining and
Adjusting the
EN Maintaining and Adjusting the Printer 8-9