Filter
Top Products
PostScript Configuration Page
The PostScript configuration page (the PS CONFIG PAGE item in the
Test Menu) is shown in Figure 5-2 on the following page.
A Settings: Current printer control panel default settings and product-specific
information such as Printer Name and PostScript version. PostScript-specific settings
include (but are not limited to):
HalftoneType: The current halftone type.
Wait Timeout: The PostScript timeout, not the timeout value in the Job Menu.
Printer Name: Name set by user (a network name, for instance).
Print Errors: Value set through the printer control panel’s PS Menu.
PostScript Version: The version of PostScript installed.
System Password/Job Password: Values are either “0” (default) or “Not Default”
(a password is present).
Jam Recovery: Indicates whether Jam Recovery is ON or OFF.
B Memory: The value shows how PostScript uses printer memory. This may be useful
for more experienced users since PostScript Level 2 allows users to configure
memory parameters (see the PostScript Level 2 “Red Book” for specific information
about these values).
C Flash Accessory: This setting will appear when the Flash SIMM is installed. It will
include the number and the SIMM size
D Printable Area: Gives the dimensions within the margins of the image area. Printable
area is dependent on the amount of memory installed. The current default is shown in
the hollow box.
E Page Count: Shows how many pages have been printed by the printer in all printer
languages. You can use the page count to track printer use.
Table 5-7 PostScript Configuration Page Printout Items
5-12 PostScript Printing EN