Filter
Top Products
To Print Transparencies or Labels:
1 Open Tray 1 by pulling down on the
top center of the door.
2 Pull out the tray extension until it
clicks into place.
3 Place up to 8 mm of labels or
transparencies print-side-up in
Tray 1.
Caution
Do not load transparencies up to the arrow
on the paper guide tabs. The stack of
transparencies shouldn’t reach higher than
2 mm below the arrow.
4 In your software’s print setup, specify
paper size and Tray 1 for the paper
source.
5 After printing, remove the printed
sheet from the output bin and lay it on
a flat surface.
4
Printing
EN Printing 4-19