Filter
Top Products
Printing with the Duplex Unit (2-Sided Printing)
With an optional duplex unit, a print job can be printed on both sides of
a sheet of paper (this is known as duplexing). See “Accessories and
Options” in Chapter 1 for part numbers and ordering information.
Specifying a Duplex Setup
To use the Duplex Unit a 2-sided setup must be selected in the HP
Printer Driver. The drivers, can be reached from the Print dialog box in
any MS Windows application. This is usually accessed from the Printer
Setup or Printer Options command, however, each application may be
different.
Paper orientation and setup work together. The setup determines how
the printer sets each page so that the printed areas on the front and back
of each sheet match.
Caution The duplex unit only prints letter, A4, legal, and executive size pages.
Never try to print on both sides of labels, transparencies, envelopes,
odd-sized pages, or paper heavier than 24 lb (90 g/m
2
). Damage to
your printer and paper jamming can result.
WARNING!
Do not pick up the printer with the duplex unit installed. If relocating
the printer, first separate the Duplex Unit from the printer.
Figure 4-9
4-24 Printing EN