NEC NP-PH1202HL Projector User Manual


  Open as PDF
of 198
 
89
5. Using On-Screen Menu
[SIGNALTYPE]
SelectionofRGBandcomponentsignals.Normally,thisissetto[AUTO].Pleasechangethesettingifthecolorofthe
imageremainsunnatural.
AUTO ..................... Automatically distinguishes RGB and component signals.
RGB
....................... Switches to the RGB input.
COMPONENT
......... Switches to the component signal input.
[VIDEOLEVEL]
SelectionofthevideosignallevelwhenconnectinganexternaldevicetotheHDMIINterminal,DisplayPortinput
terminal,andHDBaseTinputterminaloftheprojector.
AUTO ..................... The video level is switched automatically based on the information from the device outputting the signal.
Depending on the connected device, this setting may not be made properly. In this case, switch to [NORMAL”
or “ENHANCED” from the menu and view with the optimum setting.
NORMAL
................ This disables the enhanced mode.
ENHANCED
............ This improves the image’s contrast, expressing the dark and light sections more dynamically.
SUPER WHITE
....... The video contrast is improved and the dark areas appear more dynamic.
 previous next